Honda CBR 300 Forum banner
1 - 5 of 5 Posts

Registered
Joined
16 Posts
Discussion Starter · #1 · (Edited)
Is there two pieces of plastic on the front brake reservoir sightglass? Fluid looks fine and is not cloudy. 馃

See the spot? Looks like condensation? It's really humid atm. Just wondering if that may be condensation between two pieces of plastic as opposed to inside the reservoir itself (which would mean contamination).

35000
 

Registered
Joined
16 Posts
Discussion Starter · #3 ·
All I can see is the bubble you get when you have filled it so much that you can only just see the top of the oil line. If you tip the bike over to the left a bit you will find that bubble becomes a straight line. I may not be seeing what your seeing though. ;)
Not the bubble. The condensation. See it now? Does it look like it is between two pieces of plastic?
35001
 

Registered
Joined
16 Posts
Discussion Starter · #6 ·
oh yeah, wouldn't worry about that. As a bike ages you get more and more and more crap on the inside of the glass until you can barely read the oil level. Main thing is your oil colour which is excelent. If you ever have your RH engine cover off doing clutch work or such like then make sure you give the sight glass a clean on the inside if accessible.
It's brake fluid front reservoir
 
1 - 5 of 5 Posts
Top