Honda CBR 300 Forum banner
1 - 14 of 14 Posts

· Registered
Joined
·
104 Posts
Discussion Starter · #1 · (Edited)
Added hand guards to the wife's CB300F. Might be a little warmer now. Bought them at Cycle gear. Also raised the bars an inch and a half. Protective electrical tape was removed after final adjustment. Had it there to protect handlebars. The clamps on the handguards were to large for the bars so I had to build up the bars with electrical tape and clamp the clamps down on the electrical tape.
Land vehicle Vehicle Motorcycle Motor vehicle Automotive tire
Land vehicle Vehicle Motorcycle Car Motor vehicle
Vehicle Auto part Automotive tire Tire Wheel
Vehicle Tire Bicycle part Brake Auto part
Land vehicle Vehicle Motor vehicle Motorcycle Car
Vehicle Helmet Bumper Automotive exterior Car
Land vehicle Vehicle Car Motorcycle Rim
 

· Registered
Joined
·
140 Posts
I actually thought that wouldn't look good at all. I live in Arizona so this wouldn't ever cross my mind......However.......looking at your pics I would have to say that you did a great job and it actually looks really good. Nicely done my friend......you might be on to something for cold weather states.
 

· Registered
Joined
·
104 Posts
Discussion Starter · #5 ·
I actually thought that wouldn't look good at all. I live in Arizona so this wouldn't ever cross my mind......However.......looking at your pics I would have to say that you did a great job and it actually looks really good. Nicely done my friend......you might be on to something for cold weather states.
I also wired it up so she has a place to plug in her heated jacket. It's controlled by a thermostat. Then I wired a garage door opener to the horn. We have a remote gate on the driveway.
 

· Registered
Joined
·
20 Posts
I like the fact that these two mods on this bike are meant for comfort. I'll be adding some hand guards as well. I can tell a difference when switching bikes. My WR has them and they do the job. I'll need to put more miles on my F in order to check my endurance and comfort. The bar risers will definitely give yourself a more upright riding position, which is good for comfort. Good job!
 

· Registered
Joined
·
104 Posts
Discussion Starter · #10 ·
Hey CB you guys considered heated grips? I assume your next move is what, windscreen? :D;)
Grips are a good idea. Never had them always wore heated gloves if it was really cold. We wear gerbing heated jackets. They will cook you! Love mine. Wife sold her gloves they were to bulky for her taste. Might put some heated grips on it for her.

PS: You guessed my next move.
 

· Registered
Joined
·
39 Posts
Got some handguards from a 2002 Kawasaki KLR "C" model (not sold in US). Still available from K at $37 the pair!. A couple of hours' work fitting and adapting them and some paint and they look good and block a lot of the wind. Rode 2 hours at 4-6 degrees C yesterday with regular gloves. Made all the difference. Anybody who wants to save some money might look at various OEM dirt bike guards.
 

Attachments

· Registered
Joined
·
16 Posts
Hi CB300F
I am thinking about mounting a garage door opener. You said you wired it to the horn but where and how did you mount the PCB unit/clicker? Any pictures? I was thinking of adding a weatherproof "control box" for mine.
Any help would be much appreciated.
Cornelius
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top